2004 Jeanneau Sun Odyssey 35 "GENESIS"

The Sun Odyssey 35, designed by Frenchman Marc Lombard and built by Jeanneau, is completely faithful to the Jeanneau spirit : a powerful hull, efficient deck and sailplans, safety and an interior in teak. The development by our engineers of the Sun Odyssey 35 was aided by the latest in Computer Aided Design and Manufacture (CAD/CAM) techniques. Her construction using hand moulding and Prisma Process technology allows for perfect precision and high quality of materials in the lay-up of the hull and deck.

Layout: Forward cabin with double berth; Aft cabin with double berth; Port aft washroom accessible from salon; Large hanging locker between washroom and nav station

• Saloon: Ergonomic U-shaped bench seat to starboard
• Sliding teak salon table along compression post (2 positions : meal, cleaning) with central extension
• Bench seat to port
• Access to technical compartment with water distribution controls behind seat back
• Brushed stainless steel compression post
• Sectioned storage lockers under bench seats
• Water heater under forward starboard seat
• Many storage shelves
• Roof windows with curtains
• Handrail under windows
• Opening deck hatch with vent and blind
• Seat and back cushions with removable fabric covers
• Removable white stripe teak floorboards
• Halogen overhead lights Lights 2 hull ports
• Standing headroom: appr. 1,92m to 1,85m

Throughout: Coast Climate reverse-cycle AC/heat; Varnished teak joinery, Teak & holly sole

• Double polished stainless steel sink
• Single lever H/C pressure water mixer
• Tinted galley/saloon back splash
• Eno 2 burner stove w/oven and safety bar
• Pot clamps
• Two 10 lb. propane bottles
• 37 gallon refrigeration space w/top access
• Frigoboat 12v refrigeration
• Caframo fan
• Swing out waste bin
• Dry storage

• Neil Pryde mainsail ('21)
• "Stakpak" flaking ('21)
• Double-spreader mast -w/swept-back spreaders
• Neil Pryde furling genoa ('21)
• Profurl genoa furler
• E-Z Glide adjustable genoa-sheet cars
• Harken 2-speed self-tailing winches: two #40 primary, #32 halyard/reef - on cabintop
• Spinlock line-stoppers (two 3-bank; one single) - on cabintop 
• Harken 3:1 mainsheet traveler - forward of companionway
• Rigid boom vang 

I : 43.50 ft

J : 13.25 ft

P : 38.33 ft

E : 12.58 ft

• Raymarine ST60 Tridata & XDR
• Raymarine ST60 Wind
• Raymarine ST6002 autopilot
• Norhtstar Explorer 567 chartplotter
• Raymarine Ray-49 VHF transceiver
• Sony stereo

• 12V System
• 12 Switches with thermal breakers
• Breaker distribution panel
• 12V voltmeter with service, engine, and auxiliary selector
• 12V outlet
• Flip-up solar panel -- on stern pulpit
• Scheiber 12V LPG control
• Scheiber tank monitor
• 110V shorepower w/cord
• 110V breakers

• Bimini
• Dodger
• Four Gebo hatches - on cabintop
• Lofrans electric anchor windlass
• Plow anchor -w/chain & rode
• Dual anchor roller
• Leather-wrapped wheel - on pedestal
• Sunbrella wheel/pedestal cover -- by Cover Loft ('24)
• Bow and stern pulpits; Lifelines -w/gates
• Scoop -w/ fold-down swim ladder
• Teak-inlays in cockpit

• Teak strip helm seat, cockpit bench seat and transom
• Port and starboard storage lockers
• Gas bottle storage in aft port locker
• Liferaft storage in starboard cockpit locker
• Winch handle holders
• Leathered steering wheel Ø 0,90 m 1
• Compass on steering column
• Swinging swim ladder
• Manual bilge pump near helm
• Transom access via helm seat
• Emergency tiller fitting
• Rudder: Fiberglass rudder with stainless steel frame Solid stainless steel rudder shaft
• Steering system with two self-aligning rudder bearings
• Saloon: Ergonomic U-shaped bench seat to starboard
• Sliding teak salon table along compression post (2 positions : meal, cleaning) with central extension
• Bench seat to port
• Access to technical compartment with water distribution controls behind seat back
• Brushed stainless steel compression post
• Sectioned storage lockers under bench seats
• Water heater under forward starboard seat
• Many storage shelves
• Roof windows with curtains
• Handrail under windows
• Opening deck hatch with vent and blind
• Seat and back cushions with removable fabric covers
• Removable white stripe teak floorboards
• Halogen overhead lights Lights 2 hull ports
• Standing headroom : appr. 1,92m to 1,85m
• Layout: 1 Forward cabin with double berth; Aft cabin with double berth; Port aft washroom accessible from salon; Large hanging locker between washroom and nav station
• Standing headroom : appr. 1,92m
• Roof window with curtain
• Ventilation via roof port
• Handrail above galley
• Water meter
• Access to cold compressor under stove
• Countertop lighting: barlight 1 halogen overhead light
• 140 liter refrigerator with cold plate and bins, top opening
• 2 burner stove/oven with crash bar
• Dish rack and cabinets
• Rigid wastebasket
• 2 Drawers and storage under sink with access to thruhulls
• Pressure water mixer tap
• Rectangular 2-basin stainless steel sink
• Laminate countertop
• Clear galley/Salon divider L-shaped to starboard
• 12V outlet
• Service, engine, and auxiliary selectors
• 12V voltmeter
• 3 spare 110V
• 12 Switches with thermal breakers + 3 spare 12V
• Diesel engine with exchanger 1
• 70 Ah service battery
• 70 Ah engine battery
• Engine compartment under companionway
• Completely soundproofed engine compartment
• Access to engine via removable panels and swinging companionway
• Stainless steel propeller shaft
• Fixed two-blade propeller
• Fuel/water separator filter
• Raw water filter
• Anti-siphon valve
• Dripless stuffing box
• Battery separator relay
• 1/4 turn water intake thruhull valve
• Moulded fiberglass engine room bilge liner
• Monolithic polyester fiberglass hull
• Fiberglass hull structure
• Reinforced fiberglass engine bed
• Deck construction by injection process.
• Stainless steel stem fitting with 2 rollers 1
• Mechanical windlass for ø10 chain
• Stainless steel bow pulpit with nav lights
• Stainless steel stern pulpit with buoy bracket
• 2 Lifelines
• 4 Cleats with forward chocks
• Midship chocks
• Lockable chain locker cover
• Jammers on roof for halyards and control lines
• Roof winch for adjustments, halyards, and control lines
• 2 Sheet winches on cockpit coaming
• 3-sheave halyard organizers
• 2 Genoa tracks on deck with fairleads
• Mainsheet traveler on roof
• Babystay chainplate
• Capshroud, intermediate, aft lower shroud chainplates
• 2 Backstay chainplates
• Mast step with block
• Standing rigging: Anodized aluminum deck-stepped classic mast and boom 2 sets swept spreaders
• Stainless steel cable shrouds
• Backstay with bridle
• Above-deck genoa furling
• Running Rigging: 1 Jib halyard 1 Boom topping lift 1 Mainsail halyard 2 Genoa sheets 1 Mainsail sheet 1 Mainsail outhaul 2 Automatic mainsail reefs 1 Boom vang 1 Adjustable mainsheet car 1 Genoa furling line
• Epoxy treated keel
• Owner's manual
• Flexible reinforced sanitary quality hot water hose
• All thruhulls are bronze with ball-valves
• 2 winch handles

Listing MLS by Yachtr.com